Peças

The dryer reheats and dries the polyethylene granules before they are fed into the screw to remove excess moisture and improve the quality of the blown film.

The film width controller adjusts the film width by air replenishment and air release. The specific process is as follows: Air replenishment: When the film width is insufficient, the control system will increase the air pressure of the extruder head by air replenishment, thereby pushing the edge of the film to expand outward to reach the required width. Air release: On the contrary, when the film width is too large, the control system will release some gas, reduce the air pressure of the extruder head, and cause the edge of the film to shrink and return to the ideal width....

The crushed waste material can be refilled into the screw in time to avoid affecting the output and computer calculation.

Usage: used to recycle and reuse the waste edges generated during the film production process. Resource Utilization and Cost Reduction: The recycling system collects, processes, and reutilizes the discarded film edges. By recycling this waste material, manufacturers can minimize waste generation, enhance resource efficiency, and reduce production costs, as recycling trim helps in minimizing material wastage.

Usage: The EPC can detect the edge position of the film and automatically adjust the system to ensure that the film stays in the correct position throughout the production process. This helps ensure uniform width of the film, improving product quality. Reducing Waste: By ensuring that the film stays in the correct position during production, the EPC helps reduce unnecessary film waste. This contributes to increased production efficiency and lower production costs.

With or without Heating & Drying Function Capcity:50kg/100kg/150kg/300kg/500kg/1000kg

The hot slitting knife is able to slit the films into two rolls. Meanwhile, it seals the edge of films. With this device, you can get two rolls of plastic films at the

Usage: Automatically complete film winding and roll changing according to user settings. Torque motor to control the film rewinding speed and tightness, to make the film rewinding flat. Type: Single/Doublestation Friction type single winding Expansion force module: Torque motor control Air sharft: With a flattening roller to make the film even

The double-station winder can be used for winding sheet film or multi-roll slitting film.

Improve film thickness uniformity. Rotation evenly distributes materials, reducing thickness deviation. Minimize crystal points and stripes, prevent local overheating and impurity accumulation. Enhance physical property stability, reduce anisotropy for better performance. Recommended for films over 1200mm wide with high quality demands.

To make the insert of plastic film for T shirt bags or something else, which is easy to install and adjust