Dispositivos opcionais

Rapidly reduce the temperature, improve production efficiency and glossiness, reduce the friction coefficient, make the tension uniform and ensure stable traction.

A sensor used for monitoring the width of bubble. This device is for  controlling the width of films. If the plastic bubble brakes during the process, it can add air into the bubble automatically.

Usage:Quickly replace the filter by hydraulic equipment. Suitable for large screws, more labor-saving and convenient. To filter the impurity from the raw material easier and faster to avoid the die head damaged and the film broken.

Usage:Quickly replace the filter by hand. To filter the impurity from the raw material easier and faster to avoid the die head damaged and the film broken. Filter lines can be changed as per raw material’s request. Connect screw and die head tightly , avoid to leak raw material.

The screw pressure sensor on a film blowing machine is used to monitor and measure the pressure of the plastic along the screw during the extrusion process.

Usage: a reciprocating scanning X-ray online thickness gauge.installed after corona correction and before winding, combined with BZM’s uniquefast analysis algorithm, the 360 degree film bubble is analyzed to accuratelymeasure the thickness of a single layer of film without dead corners. Measuring Probe Gap: 10mm, 20mm, 30mm. Measuring range: 3um- 5mm Still resolution: 0.05um Dynamic measurement accuracy: ± 0.1um or ± 0.1% Light spot diameter: φ8mm Measure response speed: 10ms Ambient temperature range: 0 – 50C°

Automatic air ring is an efficient wind ring system with double wind lips. Combined with a convenient air temperature adjustment device, it hassignificantly improved the production line’s output and thickness tolerance.

In a film blowing machine, the surface cooler is an essential part. It’s mainly for heat exchange. It cools the blown – film or air during production. This helps solidify the film faster and maintain optimal production temperatures, thus improving film quality and production efficiency.

It can make the cooling effect of the film better and improve its transparency. To some extent, it can also increase the output. For users with insufficient factory building height, they can configure a chiller to reduce the standard height of the film blowing machine, and approximately 10 – 25% of the space can be saved in terms of height!

The rotating air ring of the blown film machine has functions like cooling, ensuring uniform cooling, improving film quality and adjusting film thickness distribution

Usage: The Inner Bubble Cooling System (IBC) on a film blowing machine is designed to control and adjust the temperature of the inner bubble during the film extrusion process. Enhancing Film Quality: The IBC system contributes to improving the uniformity and quality of the film by controlling and adjusting the temperature of the inner bubble. Cooling the inner bubble during the film blowing process helps achieve a more even film structure. Reducing Shrinkage: The IBC system helps minimize the shrinkage rate of the film. By controlling the temperature of the inner bubble, it slows down the cooling process, thereby reducing...

Usage:Use vacuum suction to automatically extract raw materials into the hopper. Continuous and uninterrupted feeding is more labor-saving and convenient.